The Calf Weaner Large, Yellow with Stainless Steel Screw is a durable and reusable device designed to aid in the weaning process of calves. It is constructed from heavyweight plastic, ensuring longevity and the ability to withstand the rigors of farm use. The steel screw and nut assembly is robust, providing a secure fit when applied. The weaner is easy to apply and remove, with spikes that face the calf to prevent it from sucking while still allowing it to graze and have physical contact with the cow. This method of weaning is known to reduce stress for both the calf and the cow, and is suitable for calves up to 18 months of age. The device's design is lightweight, minimizing discomfort for the calf. For optimal results, it is typically recommended to leave the weaners on the calves for 4-7 days before separating them from their mothers. This practice not only facilitates a smoother transition from milk to grass but also helps prevent diseases that may arise from continued suckling. The Calf Weaner Large, Yellow with Steel Screw is a practical tool for farmers looking to implement an efficient and humane weaning strategy To properly apply the Calf Weaner Large, Yellow with Steel Screw, ensure that the calf is restrained safely to prevent injury. Clean the weaner device before use. Open the screw enough to fit the calf's muzzle, and position the weaner so that the spikes face towards the calf. The spikes should prevent the calf from nursing but allow for grazing and drinking water. Secure the device by tightening the screw, but be careful not to over-tighten, as this could cause discomfort or harm to the calf. Check the fit to ensure it is snug but not too tight, allowing for some movement. It's important to monitor the calf after application to ensure it is not experiencing any distress and that the weaner remains properly in place. After the recommended period, usually 4-7 days, the weaner can be removed by loosening the screw and gently sliding the device off the calf's muzzle. Always follow the manufacturer's instructions and consult with a veterinarian if you are unsure about the process Specifically designed to stop calves from suckling. Durable plastic with very strong and durable steel wing screw. ‍

Read more less

L'anello nasale per tori IVS è uno strumento essenziale per allevatori e veterinari. Realizzato in acciaio inossidabile di prima qualità, antiruggine, per una lunga durata. Facile da usare, chiusura automatica. Superficie liscia senza bave. Facile da usare, basta un cacciavite per aprirlo.

Read more less

The bull ring, typically made of brass, is a longstanding tool used in cattle management. Its primary function is to ensure safety and control over bulls, particularly in situations where they may become aggressive or need to be led during shows or veterinary procedures. The brass material is chosen for its durability and resistance to corrosion, which is essential given the demanding conditions of farming and livestock management. The insertion of the ring is usually performed by a veterinarian when the bull is between nine and twelve months old, ensuring minimal discomfort with professional handling. The size of the ring can also play a role in the visual presentation of the bull, with larger rings often making the animal appear smaller, which can be an advantage in certain breeding contexts. Overall, the use of a brass bull ring is a testament to the blend of tradition and practicality in agricultural practices. The long, sharp point cuts a clean hole Self piercing heavy duty brass. Available in: 3/8" x 3-1/2" 3/8" x 3" 5/16" x 2-1/2" 5/16" x 3" ‍

Read more less

Paletta in plastica con fusto rigido in fibra di vetro. Impugnatura in gomma con presa da golf. Riempita di sonagli per favorire il movimento del maiale.

Read more less

Lightweight polyethylene pig sorting panel. Multiple hand holds molded into the edges. Easy to store, use and clean. 30” height. Available in 38” and 48” widths. Red. *This is an oversize item and does not qualify for Free Shipping.  ‍

Read more less

High-quality, chrome plated handle has a rubber grip handle is designed to grasp OB chains firmly. Both 30˝ and 60˝ chains are strong!  Tested to provide 1,200 lb or more pull strength.

Read more less

The Calf Weaner Orange is a durable and easy-to-apply device designed to aid in the weaning process of calves. Made from virtually unbreakable plastic, these weaners are lightweight and do not cause discomfort to the animals. They are suitable for calves up to 18 months of age and work by impeding the calf's ability to suck while still allowing them to graze and have physical contact with their mothers. This method reduces the stress associated with weaning, as it prevents the calf from nursing but does not isolate them from the herd. Typically, the weaners are left on the calves for about 4-7 days before the calves are separated from their mothers, which helps them transition to feeding on grass and other solid foods. This practice not only supports the health and welfare of the calves but also contributes to the management of the herd during the weaning period Applying a Calf Weaner Orange is a straightforward process that can be done with care and attention to the calf's comfort. First, ensure that the calf is restrained safely to prevent injury to both the animal and the handler. The weaner typically consists of two pieces that clip or snap together through the calf's nostrils. Gently separate the calf's nostrils and insert the weaner, making sure that it's securely fastened but not overly tight. It's important to check that the weaner is not causing any undue stress or discomfort to the calf. After application, monitor the calf for a short period to ensure they can breathe comfortably and are able to graze and drink water without issue. The weaner should stay in place for about 4-7 days before removal, which should coincide with the separation of the calf from its mother. Always follow the manufacturer's instructions and consult with a veterinarian if you're unsure about the process or if it's the first time you're applying a weaner Specifically designed to stop calves from suckling. Durable plastic. Easy to apply. ‍

Read more less

Fits on any Hot-Shot Electric Livestock Prod. Made of rigid fiberglass. Designed for use on livestock only. 24" = length includes the prod handle (not included, sold separately); actual length of the shaft is 15.75"36" = length includes the prod handle (not included, sold separately); actual length of the shaft is 27.75"48" = length includes the prod handle (not included, sold separately); actual length of the shaft is 39.75"60" = length includes the prod handle (not included, sold separately); actual length is 51.75"72" = length includes the prod handle (not included, sold separately); actual length of the shaft is 63.75"

Read more less

HS2000® The Green One® is a battery-operated livestock prod delivering unparalleled performance in all conditions, especially on wet animals. Hot-Shot® continues to lead the industry with our dependable, commercial-strength prods. Every unit is factory tested to high performance standards, making it the ongoing brand of choice for farmers, ranchers, and professional stock handlers and haulers. When used correctly, electric prods are a time-tested, humane way to aid in the movement of livestock; be sure to read and understand all documentation included before using this product. Permanently sealed, maintenance-free solid-state motor resists damage by dirt or moisture. Features a finger guard for added protection. Unique safety clip prevents accidental use. Latigo carrying strap and six C-cell batteries included. Comes with an interchangeable 32 inch flexible shaft. Also comes in a rechargeable model; other shaft lengths and styles are available Comes with interchangeable 32 inch flexible shaft; other shaft lengths and styles are available carrying strap and six C-cell batteries included Electronic Cattle ProdsAccording to the Bureau of Industry and Security—U.S. Department of Commerce, “…devices to administer electric shock, for example, stun guns, shock batons, shock shields, electronic cattle prods…. A license is required for all destinations (outside of the U.S.), except Canada, regardless of end-use.” Per this regulation, electric cattle prod export is not permitted without prior U.S. Government authorization.

Read more less

  Soda Bottle Lamb Nipple: Designed to fit snugly on a standard 20-ounce plastic soda bottle. The nipple is soft, pliable, and shaped naturally for tender mouths of lambs, kids, piglets, foals, and other small livestock. Special rubber formula for prolonged nipple life and improved pliability. Remember to choose the nipple that best suits your lambs’ needs for comfortable feeding.

Read more less

Acquista 1 scatola di 50 guanti OB super sensitive con cinturino, ricevi 1 scatola di guanti OB super sensitive al 50%. GUANTO OB CON TRACOLLA Guanto OB super sensibile. Questo nuovo prodotto offre una copertura aggiuntiva a tutta l'area della spalla e del braccio. Protegge la pelle e gli indumenti. - Protezione totale del braccio - La tracolla mantiene il guanto in posizione - Super sensibile ma resistente - 50 guanti per confezione GUANTO ARANCIONE SUPER SENSIBILE - Guanto arancione di alta qualità in polietilene morbido, lungo fino alla spalla - Super sensibile - Ideale per le cliniche veterinarie - 36˝ (92 cm) lunghezza della spalla - Confezionato in 100 pezzi per scatola tipo dispenser

Read more less

La polvere concentrata J-Lube si scioglie facilmente in acqua per formare un lubrificante ostetrico. J-Lube è un lubrificante efficace per tutti gli usi, completamente inerte e non irritante. Un flacone da 10 once con tappo per agitatore produce da 6 a 8 litri di lubrificante. Applicare sulle mani come un sapone in polvere. J-Lube può essere mescolato con acqua per ottenere un lubrificante liquido per uso ostetrico. J-Lube si rimuove facilmente con l'acqua. Una piccola quantità di sale da cucina aggiunta alle mani come sapone in polvere faciliterà la rimozione di ogni traccia di lubrificante. Una polvere lubrificante a base d'acqua, non profumata, formulata per un uso sicuro con il lattice. Il lubrificante è ideale per l'ostetricia, si lava via facilmente dopo l'uso e non lascia odori. Mescolare la polvere per ottenere la consistenza desiderata. Produttore: Laboratori Jorgensen Si lava via facilmente dopo l'uso e non lascia odori. Una polvere lubrificante a base d'acqua, non profumata, formulata per un uso sicuro con il lattice. La polvere concentrata di J-Lube si scioglie facilmente in acqua per formare un lubrificante ostetrico. J-Lube è un lubrificante efficace per tutti gli usi, completamente inerte e non irritante. Applicare sulle mani come un sapone in polvere. J-Lube può essere mescolato all'acqua per ottenere un lubrificante liquido.

Read more less